Dear Customers! We're out of the office from the 6th of October to the 11th of October. We sincerely apologize for the inconvenience. For WordPress 5.5.* related issues, please visit this article.
While commercially available magnet photo frames are convenient, there is immense satisfaction—and often a lower cost—in creating personalized, custom versions yourself. Making your own photo fridge magnet allows you to perfectly match your kitchen aesthetic, use unusual photo sizes, or even create unique, branded giveaways.
This guide details two simple methods for creating high-quality, durable photo frame magnets that will look fantastic on any magnetic surface, whether you're decorating your own fridge or planning to buy magnets Australia in bulk for a craft project.
Method 1: The Adhesive Magnet Sheet Method (Simple & Flexible)
This is the easiest method, ideal for creating thin, flexible frames that cover the entire back of the photo for maximum adhesion.
What You Will Need:
Photos: Printed on high-quality photo paper (matte or gloss).
Adhesive Magnet Sheets: Sheets of flexible magnet material with a peel-and-stick backing.
Clear Protective Layer (Optional but Recommended): Self-adhesive clear laminate sheets or wide, clear packing tape.
Cutting Tools: A paper cutter or a sharp utility knife and a cutting mat.
Step-by-Step Guide:
Print and Prepare: Print your photos. If you're using specialty paper, ensure the ink is fully dry.
Laminate (Optional Protection): For durability, especially in the kitchen, apply a clear self-adhesive laminate sheet over the front of the photo. If using tape, carefully cover the entire surface without overlapping the tape pieces too much. This protects the image from moisture and fingerprints.
Apply Magnet Backing: Peel the backing paper off the adhesive magnet sheet. Carefully align the photo (laminated side up) over the adhesive side of the magnet sheet and press firmly from the center outward to eliminate air bubbles.
Cut to Size: Using a sharp paper cutter or utility knife, trim the excess magnet material away. You can cut exactly to the photo edge for a borderless look, or leave a small $1/8$-inch magnetic border for extra grip.
Design the Frame (Optional): If you want a frame effect, you can use decorative paper, colorful washi tape, or permanent markers to draw a border around the photo before applying the magnetic backing.
Method 2: The Rigid Border Frame Method (Durable & Professional)
This method results in a sturdier frame that holds a photo, similar to a traditional frame, but uses magnetic strips instead of a full backer.
What You Will Need:
Frame Material: Thin craft foam, chipboard, or lightweight wood strips.
Magnetic Strips: Strong, self-adhesive magnetic tape rolls (often found in craft or hardware stores).
Clear Plastic/Vinyl: A clear sheet (like from an old document sleeve) to protect the photo.
Photo: The picture to be framed.
Adhesive: Strong craft glue.
Step-by-Step Guide:
Cut the Frame Border: Determine your desired photo size (e.g., $4 imes 6$ inches). Cut your frame material into four border pieces that will overlap the edge of the photo slightly. Glue these pieces together into a rectangular frame shape.
Create the Photo Pocket: On the back of the newly constructed frame, glue a piece of clear plastic or vinyl over the opening, creating a sleeve where the photo can be inserted. Leave one edge unglued.
Apply Magnets: Cut the strong magnetic strips into small pieces (about 1-2 inches long). Adhere these pieces to the back corners and the midpoints of the frame using the strip's self-adhesive backing or extra strong glue. Ensure the magnetic pieces are flush with the frame.
Finish: Insert your photo into the sleeve. This method provides a more dimensional look and is highly effective for promotional items or gifts. For bulk orders or professional-grade material, it's worth checking custom options from experts like fridgemagnets for pre-cut, high-strength magnetic pieces.
Pro-Tips for Perfect DIY Frames
Test the Magnet: Always test your chosen magnetic material against your fridge before gluing. A strong magnet is essential for holding the frame steady.
Keep it Lightweight: Avoid heavy frame materials that will cause the magnet to slide or detach.
Consider Bulk: If you need many magnetic photo frames Australia for gifts or events, buying magnet sheets or strips in bulk will drastically reduce the per-unit cost.
By following these simple steps, you can create unique, personalized, and functional magnet photo frames that beautifully showcase your favorite moments.
While commercially available magnet photo frames are convenient, there is immense satisfaction—and often a lower cost—in creating personalized, custom versions yourself. Making your own photo fridge magnet allows you to perfectly match your kitchen aesthetic, use unusual photo sizes, or even create unique, branded giveaways.
This guide details two simple methods for creating high-quality, durable photo frame magnets that will look fantastic on any magnetic surface, whether you're decorating your own fridge or planning to buy magnets Australia in bulk for a craft project.
Method 1: The Adhesive Magnet Sheet Method (Simple & Flexible)This is the easiest method, ideal for creating thin, flexible frames that cover the entire back of the photo for maximum adhesion.
What You Will Need:Photos: Printed on high-quality photo paper (matte or gloss).
Adhesive Magnet Sheets: Sheets of flexible magnet material with a peel-and-stick backing.
Clear Protective Layer (Optional but Recommended): Self-adhesive clear laminate sheets or wide, clear packing tape.
Cutting Tools: A paper cutter or a sharp utility knife and a cutting mat.
Step-by-Step Guide:Print and Prepare: Print your photos. If you're using specialty paper, ensure the ink is fully dry.
Laminate (Optional Protection): For durability, especially in the kitchen, apply a clear self-adhesive laminate sheet over the front of the photo. If using tape, carefully cover the entire surface without overlapping the tape pieces too much. This protects the image from moisture and fingerprints.
Apply Magnet Backing: Peel the backing paper off the adhesive magnet sheet. Carefully align the photo (laminated side up) over the adhesive side of the magnet sheet and press firmly from the center outward to eliminate air bubbles.
Cut to Size: Using a sharp paper cutter or utility knife, trim the excess magnet material away. You can cut exactly to the photo edge for a borderless look, or leave a small $1/8$-inch magnetic border for extra grip.
Design the Frame (Optional): If you want a frame effect, you can use decorative paper, colorful washi tape, or permanent markers to draw a border around the photo before applying the magnetic backing.
Method 2: The Rigid Border Frame Method (Durable & Professional)This method results in a sturdier frame that holds a photo, similar to a traditional frame, but uses magnetic strips instead of a full backer.
What You Will Need:Frame Material: Thin craft foam, chipboard, or lightweight wood strips.
Magnetic Strips: Strong, self-adhesive magnetic tape rolls (often found in craft or hardware stores).
Clear Plastic/Vinyl: A clear sheet (like from an old document sleeve) to protect the photo.
Photo: The picture to be framed.
Adhesive: Strong craft glue.
Step-by-Step Guide:Cut the Frame Border: Determine your desired photo size (e.g., $4 imes 6$ inches). Cut your frame material into four border pieces that will overlap the edge of the photo slightly. Glue these pieces together into a rectangular frame shape.
Create the Photo Pocket: On the back of the newly constructed frame, glue a piece of clear plastic or vinyl over the opening, creating a sleeve where the photo can be inserted. Leave one edge unglued.
Apply Magnets: Cut the strong magnetic strips into small pieces (about 1-2 inches long). Adhere these pieces to the back corners and the midpoints of the frame using the strip's self-adhesive backing or extra strong glue. Ensure the magnetic pieces are flush with the frame.
Finish: Insert your photo into the sleeve. This method provides a more dimensional look and is highly effective for promotional items or gifts. For bulk orders or professional-grade material, it's worth checking custom options from experts like fridgemagnets for pre-cut, high-strength magnetic pieces.
Pro-Tips for Perfect DIY FramesTest the Magnet: Always test your chosen magnetic material against your fridge before gluing. A strong magnet is essential for holding the frame steady.
Keep it Lightweight: Avoid heavy frame materials that will cause the magnet to slide or detach.
Consider Bulk: If you need many magnetic photo frames Australia for gifts or events, buying magnet sheets or strips in bulk will drastically reduce the per-unit cost.
By following these simple steps, you can create unique, personalized, and functional magnet photo frames that beautifully showcase your favorite moments.